Polyan Plus® Blanks

High performance PMMA

Description

Polyan Plus® is used for the fabrication of complete dentures, implant-supported dentures, removable partial dentures and splints.

Polyan Plus® is an industrially polymerized, thermoplastic PMMA made from highly developed copolymeric carbon chains.

NOTE: High-percentage alcohol, acetone and benzene attack PMMA and lead to the formation of crackles, among other things.

Field of application

Advantages

  • highest body compatibility, suitable for allergy sufferers
  • low post-shrinkage (< 0.4%) thus high fitting accuracy
  • very good breaking and bending strength
  • color stable and high translucency
  • veneerable
  • denser material structure than chemoplastic dentures, thus resistant to deposits and easier to clean

Technical data 

E-Modulus: 3370 MPa
Tensile strength: 76,3 MPa
Breaking stress: 70,3 MPa
Flexural strength: 120 MPa
Cross section min.: 9 mm²
Colors: pink, nature, crystal clear

* The technical/physical values given are measurement results from institutes and may be subject to fluctuation.

Biocompatibility

Polyan Plus® is characterized by the highest biocompatibility and is suitable for allergy sufferers.

Colors CAD/CAM

crystal clear – pink opal

Things to know

Contact with high-proof alcohols (60-90%) for more than 3 min. prevent. Otherwise risk of craquelure jumps.

Relinings, repairs, extensions with conventional cold-curing polymers are possible. Thermoplastic repairs of any kind possible.

Working instructions

Polyan Plus®

More application examples