Dentalos Plus®

High performance PMMA


Dentalos Plus® is an industrially polymerized, thermoplastic PMMA made from highly developed copolymer carbon chains.

Dentalos Plus® is suitable for the fabrication of, among other things, crowns and bridges, as well as inlays and onlays, also with a permanent character (>= 6 years).

Also available as Dentalos Plus® Blanks in the versions: Dentalos Plus® Multicolor and Dentalos Plus® Mono.

Application area


  • Abrasion resistant
  • Highly fracture resistant
  • Plaque resistant and biocompatible
  • Color fidelity and high transulence
  • High economic efficiency
  • High flexural strength

Technical data

Area: Dentalos Plus® Mulitcolor Dentalos Plus® Mono
E-module: 3370 MPa 3370 MPa
Tensile strength: 76,3 MPa 76,3 MPa
Breaking stress: 70,3 MPa 70,3 MPa
Flexural strength: 120 MPa 120 MPa

* The technical/physical values given are measurement results from institutes and may be subject to fluctuation.

Processing data injection molding

Cartridge preheating 15 Min.
Spray temperature 260°C
Spray pressure 9 – 9,5 bar
After pressure 1 Min.


Dentalos Plus® is characterized by the highest biocompatibility and is suitable for allergy sufferers.

Injection molding colors

A  •  A3,5 • B •  B1 •  B4 •  C •  C4

Things to know

Repairs, extensions, individual characterization and painting very feasible.

Excellent in crown and bridge technique for a wearing time between 6-8 years.

For heavy gnashers, we recommend a deep-drawing splint for the night as abrasion protection.

Avoid contact with high-percentage alcohols (60-90%) for more than 3 minutes, otherwise risk of crazelling.

Working instructions

Dentalos Plus®

More application examples