Polyan Plus® 

High performance PMMA


Polyan Plus® is used for the fabrication of complete dentures, implant-supported dentures, removable partial dentures and splints.

Polyan Plus® is an industrially polymerized, thermoplastic PMMA made from highly developed copolymeric carbon chains.

NOTE: High-percentage alcohol, acetone and benzene attack PMMA and lead, among other things, to the formation of crackles.

Field of application


  • Abrasion resistant
  • Highly fracture resistant
  • Plaque resistant and biocompatible
  • Color fidelity and high translucency
  • High economic efficiency
  • High flexural strength

Technical data

E-module: 3370 MPa
Tensile strength: 76,3 MPa
Breaking stress: 70,3 MPa
Flexural strength: 120 MPa

* The technical/physical values given are measurement results from institutes and may be subject to fluctuation.

Processing data injection molding

Cartridge preheating 15 Min.
Spray temperature 260°C
Spray pressure 9 – 9,5 bar
After pressure 1 Min.


Polyan Plus® is characterized by the highest biocompatibility and is suitable for allergy sufferers.

Injection molding colors

glasklar • rosa opal • EU 65 • rosa opal • rosa geadert

Things to know

Prevent contact with high-proof alcohols (60-90%) for more than 3 min. Otherwise risk of craquelure cracks.

Relinings, repairs, extensions possible with conventional cold-curing polymers.

Thermoplastic repairs of any kind possible.

Working instructions

Polyan Plus®

More application examples